Wax Injector - 1.5 kg
Wax Injector
Capacity 1,5 kg.
Max temperature: 85° C.
Power: 160 Watt.
Size: mm 160 x 160 x 520 h.
Made in Italy.
Wax Injector
Capacity 1,5 kg.
Max temperature: 85° C.
Power: 160 Watt.
Size: mm 160 x 160 x 520 h.
Made in Italy.
Electric Melting Furnace Kg. 1 - 1150° C
Crucible and Tongs included.
Brass in drops
Colour: yellow.
This alloy can be used only for lost-wax casting.
To purchase please select desired package.
Freeman Flakes Injection Wax - Aqua Green
Injection Temperature: 71º C / 160º F.
Pack of 454 g.
All-purpose injection wax.
Surgical Scalpel Blade No.15
White Alloy for gold ELA2 Pandora
Nickel release UNI EN 1811: 2011: 0.05 μg / cm2 / week - COMPLIANT (max. 0.88 μg / cm2 / week).
Nickel Safe Alloy, universal for 14 kt and 18 kt.
This alloy can be used for lost-wax casting and for mechanical working processes in general.
Red Alloy for gold 5P18/L Pandora
SILAB RTV 940 Transparent silicone rubber
1 Kg. Component A + 1 Kg. Component B.
Hardness in Shore A: 42±2
SILAB RTV 940 is a bi-component addition cured RTV silicone rubber (base and catalyst with ratio 1:1) which vulcanizes at room temperature.
SILAB RTV 940 is compatible with all plasters, coatings, polyurethane resins and acrylic resins.
Fusimold Transparent Silicone Rubber Low Shrinkage
Vulcanizing recommended temperature: 80 - 100 °C.
Vulcanizing time: 2 Minutes x mm.
Hardness: Shore 46.
Elongation (%): 610.
Tensile strenght (N/mm2): 8,9.
Tear strenght (N/mm): 17,4.
Shrinkage: minimum.
Sold in sheet of 500 g.
Sheet size: mm 330 x 180 x 6.
Electric Melting Furnace Kg. 3 - 1150° C
Squared ceramic crucible cm 8x8
Composition: Copper 88% - Tin 12%.
Freeman Flakes Injection Wax - Flexible Blue
Injection Temperature: 76º C / 170º F.
Pack of 454 g.
Highest Flexibility.
Rubber Mixing Bowl Ø 160 mm
Height 140 mm.
Highly-flexible vulcanized rubber bowl.
Top quality.
Freeman Flakes Injection Wax - Ruby Red
Injection Temperature: 71ºC / 160ºF.
Pack of 454 g.
All-purpose injection wax.
Squared ceramic crucible cm 6x6
Copper in sticks
Cast iron ingot mold mm 90 x 35 x 35
Ingot Size: mm 90 x 35 x 35.
Gold capacity: g. 1700.
Made in Italy.
Soldering alloy for yellow gold 18 Kt.
Carat: 18 kt.
Color: Yellow.
INDICATIONS FOR SUGGESTED USE
Melting temperature: 960° C.
Bracket temperature: 70° C.
Bracket casting cooling: immediate in lukewarm water (about 40° C).
Annealing: 520° C for 20 minutes followed by rapid cooling in hot water (min. 40 ° C).
Flow temperature: 650° C.
IMPORTANT: the brackets to be used must be vertical and closed on both sides. Open ingot molds cannot be used because the plates thus obtained break upon rolling.
Pink Silicone Rubber in sheet of 900 g.
Vulcanizing temperature: 170 - 180 °C.
Vulcanizing time: 1 hour.
Hardness: Shore 44 - 46.
Shrinkage: 2,5 %.
Sheet size: mm 300 x 300 x 6.
Adjustable Ingot Mold
Mold can be made smaller by adjusting the sides.
Heavy, precisely machined and built to last a lifetime.
Made in Italy.
To purchase please select desired size.
Delftclay standard kit 2 kg.
Includes:
- 2 Kg. of sand;
- Set of Aluminium rings Ø mm 60;
- Users Manual.
Cast iron Ingot Mold for wire
This mold can make six sizes of wire.
Made in Italy.
Ingot Size | Gold capacity |
mm 5 x 6 x 140 | g. 73 |
mm 8 x 6 x 140 | g. 118 |
mm 12 x 6 x 100 | g. 126 |
mm 6 x 6 x 140 | g. 88 |
mm 10 x 6 x 14 | g. 147 |
mm 20 x 6 x 100 | g. 210 |
Soldering alloy for White gold 18 Kt
To purchase please select desired hardness.
Carat: 18 kt.
Color: White.
INDICATIONS FOR SUGGESTED USE
Melting temperature: 970° C.
Bracket temperature: 70° C.
Bracket casting cooling: immediate in lukewarm water (about 40° C).
Annealing: 520° C for 20 minutes followed by rapid cooling in hot water (min. 40 ° C).
Flow temperature: 670° C.
IMPORTANT: the brackets to be used must be vertical and closed on both sides. Open ingot molds cannot be used because the plates thus obtained break upon rolling.
Graphite Crucible for 3 kg Melting Furnace
Red Silicone Rubber in sheet of 900 g.
Vulcanizing temperature: 170 - 180 °C.
Vulcanizing time: 1 hour.
Hardness: Shore 40.
Sheet size: mm 300 x 300 x 6.
Kevlar gloves
Freeman Flakes Injection Wax - Filigree Pink
Pack of 454 g.
Injection Temperature: 73º C / 165º F.
Very high detail.
Fusimod Blue Silicone Rubber Low Shrinkage
Vulcanizing recommended temperature: 80 - 100 °C.
Vulcanizing time: 2 Minutes x mm.
Hardness: Shore 46.
Elongation (%): 610.
Tensile strenght (N/mm2): 8,9.
Tear strenght (N/mm): 17,4.
Shrinkage: minimum.
Sold in sheet of 500 g.
Sheet size: mm 330 x 180 x 6.
Mold Frames
Graphite Stirring Rod 300 mm
White Alloy EM
Graphite Crucible for gas Furnace
Squared ceramic crucible cm 5x5
Surgical Scalpel Blade No.12
Tongs for crucibles