Replacement gasket for manual pump for wax injectors
External diameter 30 mm.
Internal diameter 17 mm.
Precision Wax Modelling Tool
Ultra-sensitive rheostat with ten different temperature regulations, from 50 °C up to 350 °C.
Includes 2 x Handpiece 7,5 W.
With four interchangeable wax-working tips included.
Made in Germany.
Ceramic replacement for Ring Stand
To be mounted on base with clamp.
Round Die HSS mm 3.00
ISO Metric thread, according to DIN 13 – M Coarse Metric -Tolerance 6g.
Closed type, fully ground according to DIN-EN 22568.
Right-hand use. Pitch: 0,5 mm. Size: Ø 16 x 5 mm.
Normal chamfer. For steel with R up to 800 N/mm^2.
Made in Germany.
Round Die HSS mm 5.00
ISO Metric thread, according to DIN 13 – M Coarse Metric -Tolerance 6g.
Closed type, fully ground according to DIN-EN 22568.
Right-hand use. Pitch: 0,8 mm. Size: Ø 16 x 5 mm.
Normal chamfer. For steel with R up to 800 N/mm^2.
Made in Germany.
Round Die HSS mm 4.00
ISO Metric thread, according to DIN 13 – M Coarse Metric -Tolerance 6g.
Closed type, fully ground according to DIN-EN 22568.
Right-hand use. Pitch: 0,7 mm. Size: Ø 16 x 5 mm.
Normal chamfer. For steel with R up to 800 N/mm^2.
Made in Germany.
C-Max gravers for engraving machines - Onglette
Preshaped with a tool point width, this C-Max Onglette can be used for cutting borders, inlay work, cutting lines with varying widths, line engraving, and stone setting techniques.
Length: 1.8" (45.72 mm). Diameter: 0.125" (3.175 mm). Use with QC Tool Holder for 1/8" Round (#004-873).
A diamond wheel is required for sharpening. The gravers can be polished to a mirror finish with a diamond wheel.
To purchase please select desired size.
2 pcs. Carbon brushes 9 x 6 mm
Complete with spring and terminal.
Spare part for FARO Flexible Shaft Motors.
Wheel Brush cotton Ø 22 mm
Screw Type Mandrel
Silicone wheel polisher
Silicone wheel High-gloss Polisher
MENZERNA M5
HATHO Scotch Brite™ Mini Trimming Wheel
Grit: 280 Medium.
Diameter Ø 25 mm.
Color: Dark grey.
HATHO Radial Bristle Discs
Grit: 80.
Diameter Ø 19 mm.
To be mounted on 2.35 mandrels.
Wheel Brush Muslin Cloth Hatho
Diameter Ø 22 mm.
Made in Germany.
Plastic Hammer 22 mm
Wooden hammer 40 mm
Texturing Hammer
Rubber mallet hard 55 mm
Nylon Hammer with exchangeable heads
Ash wood handle.
Made in Germany.
To purchase please select desired size.
PEDDINGHAUS Chasing Hammer
Rawhide Mallet 51 mm
PEDDINGHAUS Chasing Hammer
PRESIDIUM Gem Computer Gauge
Alluminium Ring Gauge - Fucsia
Metal Finger Gauge Set
Spring divider 75 mm
Brass Caliper mm 80
Precision Spring Compass mm 100
Degree Gauge
Flexible Steel Rule mm 200
CaliMax Vernier Caliper
Bracelet gauge Bergeon 6466
Capacity 120 to 220 mm.
Height 255 mm.
Made in Switzerland.
Bracelet Gauge
Small size mm 75 x 50
Micrometer 0 - 15 mm
Accuracy DIN 863. Scale 0,01 mm.
With carbide measuring faces.
Spindle Ø 5,0 mm, thread pitch 0,5 mm.
Made in Germany.
Mitutoyo Digital Caliper 500-181-30 mm 150
Accuracy: ±0,02 mm.
Small Vernier Caliper mm 70 x 0,05
High-resolution pocket balance KERN
Backlit display.
Stainless steel weighing plate Ø 80 mm.
Capacity: 150 g.
Graduation: 0,01 g.
Adjusting weight for balances
Please select Nominal value desired.
Pocket Scale OHAUS YA501 500 g. - d. 0,1
Backlit liquid crystal display (LCD).
Stainless steel pan 70 x 50 mm.
Capacity: 500 g. - Graduation: 0,1 g.
Units of Measurement: Grain, Gram, Carat, Ounce.
Scale KERN CM 150-1N
Scale KERN CM 320-1N
Laboratory balance KERN EMB 500-1
Weighting Surface dimensions: Ø 150 mm.
Capacity: 500 g.
Graduation: 0,1 g.
Power: 1 x 6LR61 Battery (included).
Laboratory balance KERN EMB1200-1
Weighting Surface dimensions: Ø 150 mm.
Capacity: 1200 g.
Graduation: 0,1 g.
Power: 1 x 6LR61 Battery (included).
Balance Kern EMS 6K1 6000 g. - d. 1 g.
Liquid crystal display (LCD).
Large, shock proof weighing plate 175 x 190 mm.
Capacity: 6000 g. - Graduation: 1 g.
Units of Measurement: dwt, g, oz, ozt.
Tanita Professional mini scale 1479J
Features include a tare/weight function, and energy saving auto power-off, a low battery indicator, and weight mode selection.
6 modes: g / oz / ozt / dwt / ct / grain.
Capacity: 200 g / 7.050 oz/ 6.430 ozt / 128.60 dwt / 1000 ct / 3086 grain.
Graduation: 0.01 g / 0.001 oz / 0.001 ozt / 0.01 dwt / 0.1 ct / 0.2 grain.
Power: 2 Batteries CR2032 (included).
Professional Diamond Scale Tanita 1230
Perfect for accurately weighing diamonds and precious gems.
Features include a tare/weight function, and energy saving auto power-off, a low battery indicator, and weight mode selection (ct, ozt, grain, g).
Features:
Calibration Weight: 20 g
Capacity: 20 g / 100 ct / 0.64 ozt / 308 gr.
Graduation: 0.002 g / 0.01ct / 0.0001ozt / 0.05 gr.
Power: 4 x AAA Batteries (LR03).
LCD Display: 4 Digit LCD display Dimensions: 6" x 4.3" x 1.1".
OptiVISOR DA-5
Magnification: 2.50 times
Focal lenght: 20.30 cm.
Optical glass prismatic lenses: ground and polished.
The lens can be easily removed and replaced with one of different magnification.
Can be worn over prescription or safety eyeglasses.
Lens Plate for OptiVISOR 1.75 x
RIMSA 188 LED Magnifying Lamp
Made in Italy.
The lens has 3 dioptres, thus offering 75% more magnification than the original.
Technical features:
| Power: | 13.7 W |
| Supply: | 110-240 V |
| Illuminance at 50 cm: | 2.250 lux |
| Dioptres / magnification power: | 3 / 1.75x |
| Colour temperature: | 5.000 K |
| Light intensity adjustment: | 5 – 100 % |
Triplet Loupe
Clip-On magnifying
Fit most metal and plastic eyeglass frames.
Ophthalmic quality, hard-coated magnifying loupe.
Made in USA.
Triplet Loupe Ø 18 mm
Magnification: 10X.
Black - Chrome finish.
Made in Japan.
Bergeon Watch-makers eyepiece
Magnification: 4 X.
Silver Blackening Solution - 250 Ml.
Brass and Copper Blackening Solution
Bottle 500 Ml.
This solution can be used to blacken Brass and Copper when used at full strength.
No heating is required.
Brass and Copper Blackening Solution
Bottle 1 Liter.
This solution can be used to blacken Brass and Copper when used at full strength.
No heating is required.
Ferrous metals Blackening Solution
Bottle 1 Liter.
This solution can be used at room temperature to blacken Ferrous metals that usually contain iron, such steel and cast iron.
Brass and Copper Blackening Solution
Bottle 5 Kg.
This solution can be used to blacken Brass and Copper when used at full strength.
No heating is required.
Elastic Belt for Doriot Drills
VALLORBE SUPER GLARDON Jewellers Saw-blades
Torch tips
Safety Tape Green
Hagerty Gold Clean 170 ml.
Reduction Bush
Steel Square Forming Mandrel mm 10 x 25
You can use this mandrel to easily form bezels, rings and a variety of components.
Lenght 350 mm.
Made in Italy.
Kit School Classic VALLORBE
Includes the following items:
1 Regular pillar 2 sides cut file LP1132-6-0;
1 Carrelette file LP1163-6-0;
1 Carrelette file LP1163-6-2;
1 Needle file - Half-round LA2402-140-2;
1 Needle file - Three-square LA2407-140-2;
1 Needle file - Square LA2408-140-2;
1 Needle file - Round LA2410-140-2;
1 Needle file - Barrette LA2411-140-2;
1 Habilis file - Half-round LH2602-1;
1 HSS Onglette Graver LO0403-0-HSS;
1 Jewelers Adjustable Sawframe 75 mm;
2 Screw-on handle for LP files CROCODILE AL410;
1 Vallorbe Adjustable Handle for Gravers AL4101.
1 Pack of 10 pcs. of Jewellers Saw-blades size 3/0.
Antitarnish ready for use solution
Long-lasting protection against oxidation and discoloring.
Absolutely no visible alterations regarding brilliance and color.
Excellent skin tolerance. Can also be used on gemstone jewellery.
Free of chromium (VI) compounds and solvents.
To purchase please select desired package.
Wax Needle Rasps with round handle
Set of 6 Files, in pouch.
Lenght: 160 mm. Cut: 2.
Shapes: FLAT, HALF-ROUND, THREE-SQUARE, SQUARE, ROUND, BARRETTE.
Top quality, Made in Italy.
Rounded Square Forming Mandrel 5 x 15 mm
You can use this mandrel to easily form bezels, rings and a variety of components.
Lenght 280 mm.
Made in Italy.
Presidium Synthetic Diamond Screener II (SDS II)
Help to screen out Type IIa diamonds likely to be laboratory-grown diamonds.
Tests on diamonds within a range in dimension from 1.5 mm in width and up to 5 mm in height (approx. 0.02 to 10 carat size).
Tests on polished diamonds of popular cuts such as brilliant round cut, emerald cut, baguette cut, etc.
Can be used on both loose and mounted diamonds (on jewelry with open-back setting).
For use on colorless diamonds from D Color down to J Color.
Drop shape Steel drawplate from 3 to 1 mm
20 Holes.
Made in Italy.
Aluminum wire solder
Thickness: 2,0 mm.
Composition: 12% Silicon - 88% Aluminum.
Melting range:577° - 582° C.
Wire Length: 50 cm.
Cadmium-free.
Use only with Brazing Flux for Aluminium soldering.
To purchase please select desired package.
Annealed iron wire
Annealed drawn iron wire in 10 kg reels.
Made in Italy.
Bronze wire solder
Thickness: 2,0 mm.
Composition: 5% Silver - 89% Copper - 6% Phosphorus.
Wire Length: 50 cm.
Melting range: 650° - 810°C.
Wire weight: about 12 grams.
Cadmium-free.
Made in Italy.
To purchase please select desired package.
Bunsen Burner
Ceramic replacement for Ring Stand
To be mounted on base with clamp.
Ceramic Ring Stand-Complete
Mounted on base with swivel to provide the exact position or angle desired.
Clamp releases rod for replacement.
Cool Paste for soldering
Protects components under direct flame.
Not necessary to remove stone before soldering.
Bottle 120 Ml.
Copper wire solder
Thickness: 1,5 mm.
Composition: 93% Copper - 7% Phosphorus.
Wire Length: 50 cm.
Melting range: 710° - 750°C.
Cadmium-free.
Made in Italy.
To purchase please select desired package.
Curved Cross-Lock Soldering Tweezers 160 mm
Polished stainless steel. Heat-resistant fiber grips.
The cross-lock mechanism opens when pressed.
Made in Italy.
Soldering Tweezers 180 mm
Punch for Silver 925 - II Size - Curved
Punch for Silver 999 - II Size - Curved
Punch for Platinum 950 - II Size - Curved
Punch for Gold 750 - II Size - Curved
Punch for Gold 375 - II Size - Curved
Punch MADE IN ITALY - I Size - Curved
Needle File Three-square
Needle File Square
Needle File Round
Needle File Knife
Needle File Half-Round
Needle File Flat
Needle File Crossing
Needle File Barrette
Set of 6 VALLORBE VALTITAN Needle Files
Shapes: FLAT, HALF-ROUND, THREE-SQUARE, SQUARE, ROUND, BARRETTE.
Lenght 180 mm.
Cut 0.
Made in Switzerland.
VALLORBE Needle Files with round handle, set of 6 Files, in pouch.
Shapes: FLAT, HALF-ROUND, THREE-SQUARE, SQUARE, ROUND, BARRETTE.
To purchase please select desired size and cut.
Set of 6 CORRADI CORINOX Needle Files with round handle
Shapes: FLAT, HALF-ROUND, THREE-SQUARE, SQUARE, ROUND, KNIFE.
Lenght 180 mm - Cut 00.
Made in Italy.
