R&R PLASTICAST investment
R&R PLASTICAST investment
R&R PLASTICAST investment
Kevlar gloves
SILAB RTV 940 Transparent silicone rubber
1 Kg. Component A + 1 Kg. Component B.
Hardness in Shore A: 42±2
SILAB RTV 940 is a bi-component addition cured RTV silicone rubber (base and catalyst with ratio 1:1) which vulcanizes at room temperature.
SILAB RTV 940 is compatible with all plasters, coatings, polyurethane resins and acrylic resins.
Soldering alloy for White gold 18 Kt
To purchase please select desired hardness.
Carat: 18 kt.
Color: White.
INDICATIONS FOR SUGGESTED USE
Melting temperature: 970° C.
Bracket temperature: 70° C.
Bracket casting cooling: immediate in lukewarm water (about 40° C).
Annealing: 520° C for 20 minutes followed by rapid cooling in hot water (min. 40 ° C).
Flow temperature: 670° C.
IMPORTANT: the brackets to be used must be vertical and closed on both sides. Open ingot molds cannot be used because the plates thus obtained break upon rolling.
Ingot Mold for wire
Freeman Flakes Injection Wax - Carvable Purple
Pack of 454 g.
Injection Temperature: 76-79ºC / 170-175ºF.
Superior carvability.
Fusimod Blue Silicone Rubber Low Shrinkage
Vulcanizing recommended temperature: 80 - 100 °C.
Vulcanizing time: 2 Minutes x mm.
Hardness: Shore 46.
Elongation (%): 610.
Tensile strenght (N/mm2): 8,9.
Tear strenght (N/mm): 17,4.
Shrinkage: minimum.
Sold in sheet of 500 g.
Sheet size: mm 330 x 180 x 6.
Fusimod Blue Silicone Rubber - 5 Kg.
Rubber Sprue bases for casting Flasks
Tree Style.
To purchase please select desided size.
Fusimold Transparent Silicone Rubber Low Shrinkage
Vulcanizing recommended temperature: 80 - 100 °C.
Vulcanizing time: 2 Minutes x mm.
Hardness: Shore 46.
Elongation (%): 610.
Tensile strenght (N/mm2): 8,9.
Tear strenght (N/mm): 17,4.
Shrinkage: minimum.
Sold in sheet of 500 g.
Sheet size: mm 330 x 180 x 6.
Mold Frames
Graphite Crucible for 3 kg Melting Furnace
Cast iron ingot mold g. 5900
Wax injection valve for Wax Injector complete with nozzle
Spare part for manual wax injector.
Made in Italy.
Blue Silicone Rubber in sheet of 900 g.
Vulcanizing temperature: 170 - 180 °C.
Vulcanizing time: 1 hour.
Hardness: Shore 44 - 46.
Shrinkage: 2,5 %.
Sheet size: mm 300 x 300 x 6.
Yellow Alloy for gold 2P18 Pandora
Replacement manual pump for wax injectors
1/4" male thread.
Made in Italy.
Squared ceramic crucible cm 5x5
Grey Ceramic Stirring Rod
Lenght 300 mm.
Cast iron ingot mold g. 2600
Surgical Scalpel Blade No.15
Freeman Flakes Injection Wax - Aqua Green
Injection Temperature: 71º C / 160º F.
Pack of 454 g.
All-purpose injection wax.
Brass in drops
Colour: yellow.
This alloy can be used only for lost-wax casting.
To purchase please select desired package.
Composition: Copper 90% - Tin 10%.
Stainless steel Casting Flasks
Use with Tree Sprue base.
To purchase please select desided size.
Hazelnut Silicone Rubber Low Shrinkage in sheet of 900 g.
Vulcanizing temperature: 85 - 90 °C.
Vulcanizing time: 1 hour.
Hardness: Shore 44 - 46.
Shrinkage: 0,3 %.
Sheet size: mm 300 x 300 x 6.
Squared ceramic crucible cm 12x12
White Alloy for gold OB307W1 Legor
Universal for 9 kt and 14 kt.
Composition: Copper 88% - Tin 12%.
Steel tongs for squared crucibles
Delftclay Sand for Sand Casting
For casting simple metal articles in sand.
Package of 2 kg.
Yellow Alloy for gold A182N ultracast
Cuttlefish bones for casting
Box 1 kg.
Black smith's tongs
In forged steel, enamelled.
Type with flat straight noses.
Lenght mm 400.
Made in Italy.
Model gypsum
Soldering alloy for yellow gold 18 Kt.
Carat: 18 kt.
Color: Yellow.
INDICATIONS FOR SUGGESTED USE
Melting temperature: 960° C.
Bracket temperature: 70° C.
Bracket casting cooling: immediate in lukewarm water (about 40° C).
Annealing: 520° C for 20 minutes followed by rapid cooling in hot water (min. 40 ° C).
Flow temperature: 650° C.
IMPORTANT: the brackets to be used must be vertical and closed on both sides. Open ingot molds cannot be used because the plates thus obtained break upon rolling.