Red Alloy for gold 5P18/L Pandora
Red Alloy for gold 5P18/L Pandora
Red Alloy for gold 5P18/L Pandora
Squared ceramic crucible cm 8x8
Cast iron ingot mold mm 90 x 35 x 35
Ingot Size: mm 90 x 35 x 35.
Gold capacity: g. 1700.
Made in Italy.
R&R ULTRA-VEST investment
Freeman Flakes Injection Wax - Tuf Guy Green
Pack of 454 g.
Injection Temperature: 76ºC / 170ºF.
High toughness.
Replacement manual pump for wax injectors
1/4" male thread.
Made in Italy.
Aluminum Sprue Former
Perfect contact between the mold and wax injector nozzle.
Stainless steel Casting Flasks
Use with Tree Sprue base.
To purchase please select desided size.
Mustard Silicone Rubber
Freeman Flakes Injection Wax - Filigree Pink
Pack of 454 g.
Injection Temperature: 73º C / 165º F.
Very high detail.
Fusimod Blue Silicone Rubber - 5 Kg.
Fusimod Blue Silicone Rubber Low Shrinkage
Vulcanizing recommended temperature: 80 - 100 °C.
Vulcanizing time: 2 Minutes x mm.
Hardness: Shore 46.
Elongation (%): 610.
Tensile strenght (N/mm2): 8,9.
Tear strenght (N/mm): 17,4.
Shrinkage: minimum.
Sold in sheet of 500 g.
Sheet size: mm 330 x 180 x 6.
R&R PLASTICAST investment
Ceramic Stirring Rod
Lenght 250 mm.
Freeman Flakes Injection Wax - Carvable Purple
Pack of 454 g.
Injection Temperature: 76-79ºC / 170-175ºF.
Superior carvability.
Delftclay standard kit 2 kg.
Includes:
- 2 Kg. of sand;
- Set of Aluminium rings Ø mm 60;
- Users Manual.
Copper 99.99 in drops
Made in Italy.
To purchase please select desired package.
Freeman Flakes Injection Wax - Turquoise
Injection Temperature: 71º C / 160º F.
Pack of 454 g.
All-purpose injection wax.
SILAB RTV 940 Transparent silicone rubber
1 Kg. Component A + 1 Kg. Component B.
Hardness in Shore A: 42±2
SILAB RTV 940 is a bi-component addition cured RTV silicone rubber (base and catalyst with ratio 1:1) which vulcanizes at room temperature.
SILAB RTV 940 is compatible with all plasters, coatings, polyurethane resins and acrylic resins.
Model gypsum
Freeman Flakes Injection Wax - Aqua Green
Injection Temperature: 71º C / 160º F.
Pack of 454 g.
All-purpose injection wax.
Red Silicone Rubber in sheet of 900 g.
Vulcanizing temperature: 170 - 180 °C.
Vulcanizing time: 1 hour.
Hardness: Shore 40.
Sheet size: mm 300 x 300 x 6.
Composition: Copper 90% - Tin 10%.
Delftclay Sand for Sand Casting
For casting simple metal articles in sand.
Package of 2 kg.
Cast iron ingot mold g. 5900
Wax Injector - 1.5 kg.
Equipped with pressure gauge and hand-operated pump.
Three different interchangeable nozzles supplied.
Wax capacity: 1,5 kg.
Max temperature: 85° C.
Made in Italy.
Replacement gasket for manual pump for wax injectors
External diameter 30 mm.
Internal diameter 17 mm.
Granular Borax Powder
Bottle of 1 kg.
Graphite Crucible for 1 kg Melting Furnace
Soldering alloy for White gold 18 Kt
To purchase please select desired hardness.
Carat: 18 kt.
Color: White.
INDICATIONS FOR SUGGESTED USE
Melting temperature: 970° C.
Bracket temperature: 70° C.
Bracket casting cooling: immediate in lukewarm water (about 40° C).
Annealing: 520° C for 20 minutes followed by rapid cooling in hot water (min. 40 ° C).
Flow temperature: 670° C.
IMPORTANT: the brackets to be used must be vertical and closed on both sides. Open ingot molds cannot be used because the plates thus obtained break upon rolling.
Copper in sticks
Surgical Scalpel Blade No.10
Brass in drops
Colour: yellow.
This alloy can be used only for lost-wax casting.
To purchase please select desired package.
Electric Melting Furnace Kg. 2 - 1150° C
Crucible and Tongs included.
Graphite Stirring Rod 300 mm
Ceramic Stirring Rod
Lenght 300 mm.