Pink Silicone Rubber
Pink Silicone Rubber in sheet of 900 g.
Vulcanizing temperature: 170 - 180 °C.
Vulcanizing time: 1 hour.
Hardness: Shore 44 - 46.
Shrinkage: 2,5 %.
Sheet size: mm 300 x 300 x 6.
Pink Silicone Rubber in sheet of 900 g.
Vulcanizing temperature: 170 - 180 °C.
Vulcanizing time: 1 hour.
Hardness: Shore 44 - 46.
Shrinkage: 2,5 %.
Sheet size: mm 300 x 300 x 6.
Fusimod Blue Silicone Rubber - 5 Kg.
Electric Melting Furnace Kg. 1 - 1150° C
Crucible and Tongs included.
Electric Melting Furnace Kg. 2 - 1150° C
Crucible and Tongs included.
Composition: Copper 88% - Tin 12%.
Wax Injector - 1.5 kg.
Equipped with pressure gauge and hand-operated pump.
Three different interchangeable nozzles supplied.
Wax capacity: 1,5 kg.
Max temperature: 85° C.
Made in Italy.
Freeman Flakes Injection Wax - Flexible Blue
Injection Temperature: 76º C / 170º F.
Pack of 454 g.
Highest Flexibility.
Steel tongs for squared crucibles
Nickel Safe white Alloy Pandora ROLLY
High performance standard alloy for 18 carats, for mechanical works.
Color: white - standard color coordinates: L * = 85.5 a * = 2.8 b * = 14.5.
Nickel release UNI EN 1811: 2011: 0.14 μg / cm2 / week.
Support for mounting wax trees
Available in two lengths, 200 and 250 mm.
Made in Italy.
To purchase please select the desired size.
Model gypsum
Silicone spray 400 ml.
Delftclay standard kit 2 kg.
Includes:
- 2 Kg. of sand;
- Set of Aluminium rings Ø mm 60;
- Users Manual.
Ceramic Stirring Rod
Lenght 300 mm.
Cast iron Ingot Mold for wire
This mold can make six sizes of wire.
Made in Italy.
Ingot Size | Gold capacity |
mm 5 x 6 x 140 | g. 73 |
mm 8 x 6 x 140 | g. 118 |
mm 12 x 6 x 100 | g. 126 |
mm 6 x 6 x 140 | g. 88 |
mm 10 x 6 x 14 | g. 147 |
mm 20 x 6 x 100 | g. 210 |
Wax injection valve for Wax Injector complete with nozzle
Spare part for manual wax injector.
Made in Italy.
Adjustable Ingot Mold
Mold can be made smaller by adjusting the sides.
Heavy, precisely machined and built to last a lifetime.
Made in Italy.
To purchase please select desired size.
Mustard Silicone Rubber
Fusimod Blue Silicone Rubber Low Shrinkage
Vulcanizing recommended temperature: 80 - 100 °C.
Vulcanizing time: 2 Minutes x mm.
Hardness: Shore 46.
Elongation (%): 610.
Tensile strenght (N/mm2): 8,9.
Tear strenght (N/mm): 17,4.
Shrinkage: minimum.
Sold in sheet of 500 g.
Sheet size: mm 330 x 180 x 6.
Replacement manual pump for wax injectors
1/4" male thread.
Made in Italy.
Casting Vacuum Machine
Ingot Mold for wire
Freeman Flakes Injection Wax - Turquoise
Injection Temperature: 71º C / 160º F.
Pack of 454 g.
All-purpose injection wax.
Wax Injector 145°C - 1.5 kg
Replacement gasket for manual pump for wax injectors
External diameter 30 mm.
Internal diameter 17 mm.
Grey Ceramic Stirring Rod
Lenght 300 mm.
Graphite Crucible for 0,5 kg Melting Furnace
Graphite Crucible for 1 kg Melting Furnace
Soldering alloy for yellow gold 18 Kt.
Carat: 18 kt.
Color: Yellow.
INDICATIONS FOR SUGGESTED USE
Melting temperature: 960° C.
Bracket temperature: 70° C.
Bracket casting cooling: immediate in lukewarm water (about 40° C).
Annealing: 520° C for 20 minutes followed by rapid cooling in hot water (min. 40 ° C).
Flow temperature: 650° C.
IMPORTANT: the brackets to be used must be vertical and closed on both sides. Open ingot molds cannot be used because the plates thus obtained break upon rolling.
Stainless steel Casting Flasks
Use with Tree Sprue base.
To purchase please select desided size.
Electric Melting Furnace Kg. 3 - 1150° C
Squared ceramic crucible cm 7x7
Cast iron ingot mold mm 70 x 35 x 25
Ingot Size: mm 70 x 35 x 25.
Gold capacity: g. 950.
Made in Italy.
Laboratory Vibrator
R&R ULTRA-VEST investment
Red Alloy for gold 5P18/L Pandora