Bronze in drops 88-12
Composition: Copper 88% - Tin 12%.
Composition: Copper 88% - Tin 12%.
Nickel Safe white Alloy Pandora ROLLY
High performance standard alloy for 18 carats, for mechanical works.
Color: white - standard color coordinates: L * = 85.5 a * = 2.8 b * = 14.5.
Nickel release UNI EN 1811: 2011: 0.14 μg / cm2 / week.
Adjustable Ingot Mold
Mold can be made smaller by adjusting the sides.
Heavy, precisely machined and built to last a lifetime.
Made in Italy.
To purchase please select desired size.
Rubber Mixing Bowl Ø 160 mm
Height 140 mm.
Highly-flexible vulcanized rubber bowl.
Top quality.
Vulcanizer
Graphite Crucible for 3 kg Melting Furnace
Ceramic Stirring Rod
Lenght 300 mm.
Kevlar gloves
Composition: Copper 90% - Tin 10%.
Graphite Crucible for gas Furnace
Freeman Flakes Injection Wax - Flexible Blue
Injection Temperature: 76º C / 170º F.
Pack of 454 g.
Highest Flexibility.
Surgical Handles No.3
Pink Silicone Rubber in sheet of 900 g.
Vulcanizing temperature: 170 - 180 °C.
Vulcanizing time: 1 hour.
Hardness: Shore 44 - 46.
Shrinkage: 2,5 %.
Sheet size: mm 300 x 300 x 6.
Mold Frames
Fusimold Transparent Silicone Rubber Low Shrinkage
Vulcanizing recommended temperature: 80 - 100 °C.
Vulcanizing time: 2 Minutes x mm.
Hardness: Shore 46.
Elongation (%): 610.
Tensile strenght (N/mm2): 8,9.
Tear strenght (N/mm): 17,4.
Shrinkage: minimum.
Sold in sheet of 500 g.
Sheet size: mm 330 x 180 x 6.
Soldering alloy for yellow gold 18 Kt.
Carat: 18 kt.
Color: Yellow.
INDICATIONS FOR SUGGESTED USE
Melting temperature: 960° C.
Bracket temperature: 70° C.
Bracket casting cooling: immediate in lukewarm water (about 40° C).
Annealing: 520° C for 20 minutes followed by rapid cooling in hot water (min. 40 ° C).
Flow temperature: 650° C.
IMPORTANT: the brackets to be used must be vertical and closed on both sides. Open ingot molds cannot be used because the plates thus obtained break upon rolling.
Freeman Flakes Injection Wax - Carvable Purple
Pack of 454 g.
Injection Temperature: 76-79ºC / 170-175ºF.
Superior carvability.
Cast iron ingot mold mm 70 x 35 x 25
Ingot Size: mm 70 x 35 x 25.
Gold capacity: g. 950.
Made in Italy.
Black smith's tongs
In forged steel, enamelled.
Type with flat straight noses.
Lenght mm 400.
Made in Italy.
Brass in drops
Colour: yellow.
This alloy can be used only for lost-wax casting.
To purchase please select desired package.
Freeman Flakes Injection Wax - Ruby Red
Injection Temperature: 71ºC / 160ºF.
Pack of 454 g.
All-purpose injection wax.
Replacement manual pump for wax injectors
1/4" male thread.
Made in Italy.
Support for mounting wax trees
Available in two lengths, 200 and 250 mm.
Made in Italy.
To purchase please select the desired size.
Squared ceramic crucible cm 6x6
Freeman Flakes Injection Wax - Filigree Pink
Pack of 454 g.
Injection Temperature: 73º C / 165º F.
Very high detail.
O-rings and gaskets replacement kit for Wax Injector 1,5 Kg.
To replace worn-out o-rings and gaskets of Wax Injector.
Includes: No. 5 o-rings. + No. 1 Gasket for pump.
Freeman Flakes Injection Wax - Aqua Green
Injection Temperature: 71º C / 160º F.
Pack of 454 g.
All-purpose injection wax.
Cuttlefish bones for casting
Box 1 kg.
Freeman Flakes Injection Wax - Turquoise
Injection Temperature: 71º C / 160º F.
Pack of 454 g.
All-purpose injection wax.
Red Silicone Rubber in sheet of 900 g.
Vulcanizing temperature: 170 - 180 °C.
Vulcanizing time: 1 hour.
Hardness: Shore 40.
Sheet size: mm 300 x 300 x 6.
Replacement gasket for manual pump for wax injectors
External diameter 30 mm.
Internal diameter 17 mm.
Squared ceramic crucible cm 12x12
Casting Vacuum Machine
Squared ceramic crucible cm 10x10
Graphite Crucible for Induction Melting Machines CEIA F1
R&R PLASTICAST investment