O-rings and gaskets for Wax Injector 1,5 Kg.
O-rings and gaskets replacement kit for Wax Injector 1,5 Kg.
To replace worn-out o-rings and gaskets of Wax Injector.
Includes: No. 5 o-rings. + No. 1 Gasket for pump.
O-rings and gaskets replacement kit for Wax Injector 1,5 Kg.
To replace worn-out o-rings and gaskets of Wax Injector.
Includes: No. 5 o-rings. + No. 1 Gasket for pump.
Cast iron ingot mold g. 2600
Squared ceramic crucible cm 10x10
Replacement manual pump for wax injectors
1/4" male thread.
Made in Italy.
R&R PLASTICAST investment
Squared ceramic crucible cm 12x12
Brass in drops
Colour: yellow.
This alloy can be used only for lost-wax casting.
To purchase please select desired package.
See-Thru Mold Frame
Contains 2 glass cover plates with 2 metal clamps and one center frame with a sprue former for making the sprue for the model.
Size: mm 53 x 50 x 90 h.
Made in USA.
Boric acid powder for fusion
Bottle 1 kg.
Squared ceramic crucible cm 5x5
Silicone spray 400 ml.
R&R ULTRA-VEST investment
Soldering alloy for yellow gold 18 Kt.
Carat: 18 kt.
Color: Yellow.
INDICATIONS FOR SUGGESTED USE
Melting temperature: 960° C.
Bracket temperature: 70° C.
Bracket casting cooling: immediate in lukewarm water (about 40° C).
Annealing: 520° C for 20 minutes followed by rapid cooling in hot water (min. 40 ° C).
Flow temperature: 650° C.
IMPORTANT: the brackets to be used must be vertical and closed on both sides. Open ingot molds cannot be used because the plates thus obtained break upon rolling.
Red Silicone Rubber in sheet of 900 g.
Vulcanizing temperature: 170 - 180 °C.
Vulcanizing time: 1 hour.
Hardness: Shore 40.
Sheet size: mm 300 x 300 x 6.
Surgical Handles No.3
Vulcanizer
Laboratory Vibrator
Freeman Flakes Injection Wax - Filigree Pink
Pack of 454 g.
Injection Temperature: 73º C / 165º F.
Very high detail.
Wax Injector 145°C - 1.5 kg
Graphite Crucible for 3 kg Melting Furnace
Composition: Copper 90% - Tin 10%.
Squared ceramic crucible cm 7x7
Cast iron Ingot Mold for wire
This mold can make six sizes of wire.
Made in Italy.
Ingot Size | Gold capacity |
mm 5 x 6 x 140 | g. 73 |
mm 8 x 6 x 140 | g. 118 |
mm 12 x 6 x 100 | g. 126 |
mm 6 x 6 x 140 | g. 88 |
mm 10 x 6 x 14 | g. 147 |
mm 20 x 6 x 100 | g. 210 |
Freeman Flakes Injection Wax - Tuf Guy Green
Pack of 454 g.
Injection Temperature: 76ºC / 170ºF.
High toughness.
White Alloy EM
Wax injection valve for Wax Injector complete with nozzle
Spare part for manual wax injector.
Made in Italy.
Wax Injector
Capacity 1,5 kg.
Max temperature: 85° C.
Power: 160 Watt.
Size: mm 160 x 160 x 520 h.
Made in Italy.
Cuttlefish bones for casting
Box 1 kg.
Freeman Flakes Injection Wax - Flexible Blue
Injection Temperature: 76º C / 170º F.
Pack of 454 g.
Highest Flexibility.
Yellow Silicone Rubber in sheet of 900 g.
Vulcanizing temperature: 170 - 180 °C.
Vulcanizing time: 1 hour.
Hardness: Shore 50.
Shrinkage: 2,5 %.
Sheet size: mm 300 x 300 x 6.
Grey Ceramic Stirring Rod
Lenght 300 mm.
Composition: Copper 88% - Tin 12%.
Cast iron ingot mold mm 90 x 35 x 35
Ingot Size: mm 90 x 35 x 35.
Gold capacity: g. 1700.
Made in Italy.
Hazelnut Silicone Rubber Low Shrinkage in sheet of 900 g.
Vulcanizing temperature: 85 - 90 °C.
Vulcanizing time: 1 hour.
Hardness: Shore 44 - 46.
Shrinkage: 0,3 %.
Sheet size: mm 300 x 300 x 6.
Graphite Stirring Rod 300 mm
Mold Frames