Tong to draw the wire manually
Tong to draw the wire manually
It can be used, for small section wires, to replace the drawing bench.
Size: 260 x 80 x 18 mm.
Weight: 0.6 kg.
Made in Italy.
Metal Forming Tools
Tong to draw the wire manually
It can be used, for small section wires, to replace the drawing bench.
Size: 260 x 80 x 18 mm.
Weight: 0.6 kg.
Made in Italy.
Draw Bench, short version - Usefull length: 850 mm.
Supplied without draw tongs, available as accessory.
Two drawing speeds: direct drive or 4:1 gear ratio. Maximum wire diameter: 6 mm.
Size: mm 1300 x 450 x 800h.
Weight: kg 48.
Made in Italy.
Steel drawplate Rectangle Shape
Height / width ratio 75%.
From 6 x 4,50 to 3 x 2,25 mm. 31 Holes.
Made in Italy.
Steel drawplate Half round Shape
Height / width ratio 50%.
From 6 x 3,00 a 3 x 1,50 mm. 31 Holes.
Made in Italy.
Set for Chased Work
10 pieces with different ornaments.
Top quality.
High-quality round disc cutter set from 2 up to 18 mm.
Die sizes in mm: 2-3-4-5-6-7-8-9-10-11-12-13-14-15-16-17-18.
Maximum thickness: 0.8 mm (on gold).
Hardened and tempered, shock-resistant tool steel with precision-ground surfaces.
Made in Italy.
Economy Round Disc Cutter Set
Disc cutter set from 3 up to 16 mm.
Die sizes in mm: 3-4,5-5-6-7-7,5-8-8,5-10-11-12-13-14-16.
Maximum thickness: 0.4 mm (on gold).
Oval Dapping Block Set with 4 sides and 16 depressions
With 4 oval Dapping ball punches in hardened tempered steel (Ø mm 18 - 26 - 34 - 41).
With plastic base.
Top quality product for exceptional results.
Made in Italy.
Alphabet Characters Marking punch set - mm 8.0
Cast Iron Pitch-Bowl with Rubber pad
Very useful when forming, chasing and stamping.
Available diameters: 100 mm and 160 mm.
To purchase please select desired size.
Cast Iron Pitch-Bowl
Very useful when forming, chasing and stamping.
Diameter 200 mm.
Steel drawplate Half round Shape
Height / width ratio 60%.
From 9 x 5,40 a 6 x 3,60. 31 Holes.
Made in Italy.
Grabador
Cast Iron Necklace Mandrel
Perfect oval Bezel Forming Punch Set 4 - 14 mm
11 Holes, from 4 to 14 mm.
Includes a single, 17° angled punch precisely machined.
Made in Italy.
Steel Round Forming Mandrel 3 x 10 mm
You can use this mandrel to easily form bezels, rings and a variety of components.
Lenght 220 mm.
Made in Italy.
Alphabet Characters Marking punch set - mm 2.0
Steel Dapping Block
Size: 70 x 70 mm.
Diameters in mm: Ø 45 - 46 - 47 - 48 - 55 - 56.
Made in Italy.
Numerical Steel Marking punch set - mm 5.0
Miter-Cutting Vise and Jig
Manual Rolling Mill plate and wire mm 100 with reduction gearbox
Size: mm 330 x 110 x 330h.
Weight: kg 30
Self-locking Draw Tongs
It enables to draw longer wires compared to the traditional pliers-hook system.
Equipped with replaceable hardened steel clamps.
Size: mm 260 x 95 x 20h.
Weight: kg 2.
Excellent quality Italian product.
Dapping punch set from 4 to 55 mm
The set includes a Cube dapping block, no. 21 punches, and Teflon base.
Made in Italy top quality product for exceptional results.
Draw Bench - Usefull length: 1300 mm.
Supplied without draw tongs, available as accessory.
The gears rotate on self-lubricating bushes; the chain also, unlike other benches, is supported by strips in antiwear material.
Two drawing speeds: direct drive or 4:1 gear ratio.
Maximum wire diameter: 10 mm.
Size: mm 1800 x 450 x 800h.
Weight: kg 55.
Made in Italy.
Manual Rolling Mill mm 100
12 pcs. different ornaments
Spare punches for disc cutter
Hardened steel, excellent quality and durability.
Made in Italy.
To purchase please select desired size.
Steel Round Forming Mandrel for rings mm 10 x 25
With Italian size from 1 up to 36.
You can use this mandrel to easily form bezels, rings and a variety of components.
Lenght 350 mm.
Made in Italy.
Numerical Steel Marking punch set - mm 6.0
Double Electric Rolling Mill plate and wire mm 100
Dimensions: mm 720 x 300 x 500h.
Single-phase electric motor, power 1.1 kW.
Weight: 105 kg.
Adjustable speed from 15 to 30 RPM without loss of power even at low RPM: guaranteed torque and power. Italian product, maximum reliability and durability.
Construction according to CE standards in compliance with current regulations on safety and accident prevention.
Steel drawplate Half round Shape
Height / width ratio 50%.
From 9 x 4,50 to 6 x 3,00 mm. 31 Holes.
Made in Italy.
Hexagonal Steel drawplate from 3 to 1 mm
20 Holes.
Made in Italy.
Blunt Square Forming Mandrel 9 x 16 mm
You can use this mandrel to easily form bezels, rings and a variety of components.
Lenght 300 mm.
Made in Italy.
Electric Rolling Mill plate and wire mm 100
Dimensions: mm 445 x 300 x 500h.
Single-phase electric motor, power 1.1 kW.
Weight: 85 kg.
Adjustable speed from 15 to 30 RPM without loss of power even at low RPM: guaranteed torque and power. Italian product, maximum reliability and durability.
Construction according to CE standards in compliance with current regulations on safety and accident prevention.
Steel drawplate Triangular Shape
Height / width ratio 87%.
From 9 x 7,83 to 6 x 5,22 mm. 31 Holes.
Made in Italy.
Draw Tongs
Size: mm 240 x 60 x 60.
Weight: Kg. 1,6.
Made in Italy.