Economy Dapping punch set
Economy Dapping punch set
Metal Forming Tools
Economy Dapping punch set
Round Bezel Forming Punch Set 5 - 20 mm
Half round drawplate 70%
High-quality round disc cutter set from 2 up to 18 mm.
Die sizes in mm: 2-3-4-5-6-7-8-9-10-11-12-13-14-15-16-17-18.
Maximum thickness: 0.8 mm (on gold).
Hardened and tempered, shock-resistant tool steel with precision-ground surfaces.
Made in Italy.
Draw Tongs
Size: mm 240 x 60 x 60.
Weight: Kg. 1,6.
Made in Italy.
Cast Iron Pitch-Bowl
Very useful when forming, chasing and stamping.
Diameter 200 mm.
Spare punches for disc cutter
Hardened steel, excellent quality and durability.
Made in Italy.
To purchase please select desired size.
Alphabet Characters Marking punch set - mm 1.0
Steel Square Forming Mandrel mm 4 x 20
You can use this mandrel to easily form bezels, rings and a variety of components.
Lenght 300 mm.
Made in Italy.
Square Bezel Forming Punch Set 4 - 14 mm
11 Holes, from 4 to 14 mm. Square shape.
The set includes a single, 17° angled punch precisely machined.
The block is case hardened and has highly polished, tapered holes.
Made in Italy.
Hardened Steel Anvil mm 100
Polished steel head.
Round cast iron base Ø 100 mm.
Made in Italy.
Dapping punch set from 4 to 55 mm
The set includes a Cube dapping block, no. 21 punches, and Teflon base.
Made in Italy top quality product for exceptional results.
Alphabet Characters Marking punch set - mm 3.0
Cast Iron Anvil
Size: mm 190 x 53 x 68h.
Weight: kg 2,5.
Steel Dapping Block from 4 to 55 mm
Diameters in mm: Ø 4-5-6-7-9-10-11-12-15-16-17-18-22-24-28-30-38-40-45-50-55.
Made in Italy.
Steel Bench Block
Size: mm 100 x 100 x 20 h.Weight: kg 1,6.
Made in Italy.
Manual Rolling Mill plate and wire mm 100 with reduction gearbox
Size: mm 330 x 110 x 330h.
Weight: kg 30
Oval Disc Cutter Set
6 available die sizes:
22 x 17,5 mm
30 x 24 mm
18 x 14 mm
26 x 21 mm
24 x 19 mm
20 x 12 mm
Maximum thickness: 0.8 mm (on gold).
Made in Italy.
Steel drawplate Half round Shape
Height / width ratio 50%.
From 6 x 3,00 a 3 x 1,50 mm. 31 Holes.
Made in Italy.
Steel drawplate Half round Shape
Height / width ratio 60%.
From 9 x 5,40 a 6 x 3,60. 31 Holes.
Made in Italy.
Electric Rolling Mill plate and wire mm 100
Dimensions: mm 445 x 300 x 500h.
Single-phase electric motor, power 1.1 kW.
Weight: 85 kg.
Adjustable speed from 15 to 30 RPM without loss of power even at low RPM: guaranteed torque and power. Italian product, maximum reliability and durability.
Construction according to CE standards in compliance with current regulations on safety and accident prevention.
Pneumatic Hammer Handpiece
Steel block with half round slots
Oval Dapping Block Set with 4 sides and 16 depressions
With 4 oval Dapping ball punches in hardened tempered steel (Ø mm 18 - 26 - 34 - 41).
With plastic base.
Top quality product for exceptional results.
Made in Italy.
Round Mandrel for Bracelets Medium
Economy Round Disc Cutter Set
Disc cutter set from 3 up to 16 mm.
Die sizes in mm: 3-4,5-5-6-7-7,5-8-8,5-10-11-12-13-14-16.
Maximum thickness: 0.4 mm (on gold).
Grabador
Alphabet Characters Marking punch set - mm 8.0
Half round drawplate 33%
12 pcs. different ornaments
Alphabet Lowercase Characters Marking punch set - mm 4.0
Tong to draw the wire manually
It can be used, for small section wires, to replace the drawing bench.
Size: 260 x 80 x 18 mm.
Weight: 0.6 kg.
Made in Italy.
Draw Bench - Usefull length: 1300 mm.
Supplied without draw tongs, available as accessory.
The gears rotate on self-lubricating bushes; the chain also, unlike other benches, is supported by strips in antiwear material.
Two drawing speeds: direct drive or 4:1 gear ratio.
Maximum wire diameter: 10 mm.
Size: mm 1800 x 450 x 800h.
Weight: kg 55.
Made in Italy.
Numerical Steel Marking punch set - mm 2.0
Alphabet Characters Marking punch set - mm 5.0
Rectangular Bezel Forming Punch Set 14 - 21 mm