Steel Bench Block 100 x 100 mm
Steel Bench Block
Size: mm 100 x 100 x 20 h.Weight: kg 1,6.
Made in Italy.
Metal Forming Tools
Steel Bench Block
Size: mm 100 x 100 x 20 h.Weight: kg 1,6.
Made in Italy.
Steel drawplate Oval Shape
Height / width ratio 75%.
From 3 x 2,25 a 1 x 0,75 mm. 20 Holes.
Made in Italy.
Steel drawplate Oval Shape
Height / width ratio 55%.
From 9 x 4,95 a 6 x 3,30. 31 Holes.
Made in Italy.
Electric Rolling Mill plate and wire mm 100
Dimensions: mm 445 x 300 x 500h.
Single-phase electric motor, power 1.1 kW.
Weight: 85 kg.
Adjustable speed from 15 to 30 RPM without loss of power even at low RPM: guaranteed torque and power. Italian product, maximum reliability and durability.
Construction according to CE standards in compliance with current regulations on safety and accident prevention.
Alphabet Lowercase Characters Marking punch set - mm 3.0
Steel drawplate Round Shape
From 3 to 1 mm. 31 Holes.
Made in Italy.
Rectangular Bezel Forming Punch Set 14 - 21 mm
Round Bezel Forming Punch Set 5 - 20 mm 32°
Draw Tongs
Size: mm 240 x 60 x 60.
Weight: Kg. 1,6.
Made in Italy.
Hardened steel anvil mm 105
Plated steel head.
Round cast iron base Ø 70 mm.
Cast Iron Necklace Mandrel
Hinge Leveller
Steel drawplate Triangular Shape
Height / width ratio 87%.
From 3 x 2,61 to 0,5 x 0,435 mm. 31 Holes.
Made in Italy.
Flat Dapping Block 2 to 32 mm
Hardened steel Oval Dapping Block
With 4 sides and 16 depressions.
Top quality product for exceptional results.
Made in Italy.
Bezel Forming Punch Set
11 Holes, from 4 to 14 mm.
Narrow hexagon shape.
The set includes a single, 17° angled punch precisely machined.
The block is case hardened and has highly polished, tapered holes.
Made in Italy.
Oval Mandrel for Bracelets Small
Steel Round Forming Mandrel 10 x 25 mm
You can use this mandrel to easily form bezels, rings and a variety of components.
Lenght 350 mm.
Made in Italy.
Grabador
Equipment for Grooved steel cube
The set includes 13 elements in hardened and ground steel.
Made in Italy.
Cast Iron Necklace Mandrel Large
Manual Rolling Mill mm 120
Draw Bench - Usefull length: 1300 mm.
Supplied without draw tongs, available as accessory.
The gears rotate on self-lubricating bushes; the chain also, unlike other benches, is supported by strips in antiwear material.
Two drawing speeds: direct drive or 4:1 gear ratio.
Maximum wire diameter: 10 mm.
Size: mm 1800 x 450 x 800h.
Weight: kg 55.
Made in Italy.
Diamond tip for Grabador
Steel Dapping Block from 4 to 55 mm
Diameters in mm: Ø 4-5-6-7-9-10-11-12-15-16-17-18-22-24-28-30-38-40-45-50-55.
Made in Italy.
Steel drawplate Half round Shape
Height / width ratio 50%.
From 9 x 4,50 to 6 x 3,00 mm. 31 Holes.
Made in Italy.
Steel Square Forming Mandrel mm 10 x 25
You can use this mandrel to easily form bezels, rings and a variety of components.
Lenght 350 mm.
Made in Italy.
Steel drawplate Oval Shape
Height / width ratio 75%.
From 6 x 4,50 a 3 x 2,25 mm. 31 Holes.
Made in Italy.
Alphabet Characters Marking punch set - mm 1.5
Tong to draw the wire manually
It can be used, for small section wires, to replace the drawing bench.
Size: 260 x 80 x 18 mm.
Weight: 0.6 kg.
Made in Italy.
Round draw die in tungsten
Inserted in brass wheel Ø 25 x 12 mm.
Available sizes from 0.20 up to 3.20 mm, in progression of 0.05 mm.
Made in Italy.
To purchase please select desired size.
Square Bezel Forming Punch Set 4 - 14 mm
11 Holes, from 4 to 14 mm. Square shape.
The set includes a single, 17° angled punch precisely machined.
The block is case hardened and has highly polished, tapered holes.
Made in Italy.
Flat Dapping Block 2 to 20 mm
Steel drawplate Half round Shape
Height / width ratio 50%.
From 3 x 1,50 a 1 x 0,50 mm. 20 Holes.
Made in Italy.
Self-locking Draw Tongs
It enables to draw longer wires compared to the traditional pliers-hook system.
Equipped with replaceable hardened steel clamps.
Size: mm 260 x 95 x 20h.
Weight: kg 2.
Excellent quality Italian product.
Steel Round Forming Mandrel 3 x 10 mm
You can use this mandrel to easily form bezels, rings and a variety of components.
Lenght 220 mm.
Made in Italy.