Numerical Marking punch set - mm 1.0
Numerical Steel Marking punch set - mm 1.0
Metal Forming Tools
Numerical Steel Marking punch set - mm 1.0
Alphabet Characters Marking punch set - mm 6.0
Hardened Steel Anvil mm 100
Polished steel head.
Round cast iron base Ø 100 mm.
Made in Italy.
Planishing hammer
Manual Rolling Mill plate and wire mm 100 with reduction gearbox
Size: mm 330 x 110 x 330h.
Weight: kg 30
Manual Rolling Mill mm 100
Rolling mill corrugater with base, Big type
4 steps: 0,4 - 0,5 - 0,6 - 0,7 mm.
Rollers width: 3,4 mm.
Maximum thickness: 0.4 mm (on gold).
Size: 85 x 290 mm.
Made in Italy.
Bezel Forming Punch Set
11 Holes, from 4 to 14 mm.
Narrow hexagon shape.
The set includes a single, 17° angled punch precisely machined.
The block is case hardened and has highly polished, tapered holes.
Made in Italy.
Numerical Steel Marking punch set - mm 6.0
Draw Bench - Usefull length: 1300 mm.
Supplied without draw tongs, available as accessory.
The gears rotate on self-lubricating bushes; the chain also, unlike other benches, is supported by strips in antiwear material.
Two drawing speeds: direct drive or 4:1 gear ratio.
Maximum wire diameter: 10 mm.
Size: mm 1800 x 450 x 800h.
Weight: kg 55.
Made in Italy.
Draw Bench, short version - Usefull length: 850 mm.
Supplied without draw tongs, available as accessory.
Two drawing speeds: direct drive or 4:1 gear ratio. Maximum wire diameter: 6 mm.
Size: mm 1300 x 450 x 800h.
Weight: kg 48.
Made in Italy.
Rolling mill corrugater with base, small type
4 steps: 0,4 - 0,5 - 0,6 - 0,7 mm.
Rollers width: 2,5 mm.
Maximum thickness: 0.3 mm (on gold).
Size: 50 x 250 mm.
Made in Italy.
Steel drawplate Half round Shape
Height / width ratio 50%.
From 6 x 3,00 a 3 x 1,50 mm. 31 Holes.
Made in Italy.
Cast Iron Anvil
Size: mm 190 x 53 x 68h.
Weight: kg 2,5.
Oval Mandrel for Bracelets Big
Oval Mandrel for Bracelets Medium
Small Shears
Particularly suitable for small operations on copper, brass, aluminium, sheet metal plates.
Max cutting thickness for different Material:
Copper - Brass - Mild steel sheet: mm 1,0.
Aluminium: mm 1,2.
Blade length: mm 200.
Max bending thickness: mm 1,0.
Base dimensions: 230 x 125 mm.
Weight: Kg. 12.
Cast Iron Necklace Mandrel Large
Manual Rolling Mill mm 120
Steel drawplate Half round Shape
Height / width ratio 70%.
From 6 x 4,20 a 3 x 2,10 mm. 31 Holes.
Made in Italy.
Steel drawplate Oval Shape
Height / width ratio 75%.
From 3 x 2,25 a 1 x 0,75 mm. 20 Holes.
Made in Italy.
Spring divider 75 mm
Sharp Oval Bezel Forming Punch Set 5 - 15 mm
Numerical Steel Marking punch set - mm 5.0
Alphabet Characters Marking punch set - mm 2.0
Electric Rolling Mill plate and wire mm 120
Dimensions: mm 465 x 300 x 500h.
Single-phase electric motor, power 1.1 kW.
Weight: 90 kg.
Adjustable speed from 15 to 30 RPM without loss of power even at low RPM: guaranteed torque and power. Italian product, maximum reliability and durability.
Construction according to CE standards in compliance with current regulations on safety and accident prevention.
Electric Rolling Mill plate and wire mm 100
Dimensions: mm 445 x 300 x 500h.
Single-phase electric motor, power 1.1 kW.
Weight: 85 kg.
Adjustable speed from 15 to 30 RPM without loss of power even at low RPM: guaranteed torque and power. Italian product, maximum reliability and durability.
Construction according to CE standards in compliance with current regulations on safety and accident prevention.
Double Electric Rolling Mill plate and wire mm 120
Dimensions: mm 760 x 300 x 500h.
Single-phase electric motor, power 1.1 kW.
Weight: 120 kg.
Adjustable speed from 15 to 30 RPM without loss of power even at low RPM: guaranteed torque and power. Italian product, maximum reliability and durability.
Construction according to CE standards in compliance with current regulations on safety and accident prevention.
Double Electric Rolling Mill plate and wire mm 100
Dimensions: mm 720 x 300 x 500h.
Single-phase electric motor, power 1.1 kW.
Weight: 105 kg.
Adjustable speed from 15 to 30 RPM without loss of power even at low RPM: guaranteed torque and power. Italian product, maximum reliability and durability.
Construction according to CE standards in compliance with current regulations on safety and accident prevention.
Pneumatic Hammer Handpiece
Steel Oval Forming Mandrel mm 8x12 - 26x34
You can use this mandrel to easily form bezels, rings and a variety of components.
Lenght 320 mm.
Made in Italy.
Planishing hammer
Head diameter Ø 78 mm.
Made in Italy.
Spring divider 100 mm
Steel drawplate Round Shape
From 3 to 0,5 mm. 31 Holes.
Made in Italy.
High-quality round disc cutter set from 2 up to 18 mm.
Die sizes in mm: 2-3-4-5-6-7-8-9-10-11-12-13-14-15-16-17-18.
Maximum thickness: 0.8 mm (on gold).
Hardened and tempered, shock-resistant tool steel with precision-ground surfaces.
Made in Italy.
Manual Rolling Mill mm 100