“Parigi” Blown Air Torch
“Parigi” Blown Air Torch
Available for Propane Gas or Methane.
Lenght: cm 20. Weight: 180 g.
Grades: 1400°C.
Made in Italy.
Tools for Soldering and Welding
“Parigi” Blown Air Torch
Available for Propane Gas or Methane.
Lenght: cm 20. Weight: 180 g.
Grades: 1400°C.
Made in Italy.
Welding wires for silver alloys Ag 970/000 0,35 mm
Diameter: 0,35 mm.
Lenght: 1000 mm.
Lampert Item number: 304 344.
ORION mPulse 30 arc welder
Vermiculite Soldering Block
Universal Gas Butane Lighter Refill
Content: 160 ml.
Torch Handle for oxyhydrogen welding machines
With open/close tap.
Made in Italy.
Ceramic Ring Stand-Complete
Mounted on base with swivel to provide the exact position or angle desired.
Clamp releases rod for replacement.
Air-Gas welding Torch with two control knobs and pilot flame
Pre-mixture flame and inner cone flame. Air pressure: 1,5 bar.
Lenght: cm 23. Grades: 1600° C. Weight: 265 g. Inner cone Ø 3 mm.
Made in Italy.
Natural Charcoal Block for soldering
Reflects heat back to the work for maximum soldering results.
Made from select, close-grained, knot-free hardwood.
Aluminum wire solder
Thickness: 2,0 mm.
Composition: 12% Silicon - 88% Aluminum.
Melting range:577° - 582° C.
Wire Length: 50 cm.
Cadmium-free.
Use only with Brazing Flux for Aluminium soldering.
To purchase please select desired package.
Silver wire solder Extra-easy 56%
Thickness: 1,5 mm.
Composition: 56% Silver - 22% Copper - 17% Zinc.
Melting range: 620° - 650°C.
To purchase please select desired package.
Air-Gas welding Torch
Use with methane gas and compressed air.
To be used with interchangeable tips (see accessories).
With pilot flame, with two control knobs.
Length: 30 cm. Weight: 295 g.
Made in Italy.
Rotating soldering table
With high-heat ceramic board.
Diameter: Ø 115 mm.
Graphite Ring Stand-Complete
Mounted on base with swivel to provide the exact position or angle desired.
Clamp releases rod for replacement.
Ceramic Red Brick
Air-Gas welding Torch
Use with methane gas and compressed air.
To be used with interchangeable tips (see accessories).
With pilot flame, with two control knobs.
Length: 37 cm. Weight: 480 g.
Made in Italy.
Granular pickling agent - kg. 1
Ceramic White Brick
PUK Tungsten electrodes
Electrodes Eco-pack 10 pieces 0.6 mm WLa
10 pieces - contains no Thorium oxide (non radioactive).
Size: 0,6 x 50 mm.
Silver Sheet Solder - Soft
Flux Brush
Fine Borax Cone
Prepared borax for making flux for soldering jewelry.
Dissolves easily when rubbed on borax slate.
Comes in 100 g. cone.
Torch tips
Soldering alloy for yellow gold 18 Kt.
Carat: 18 kt.
Color: Yellow.
INDICATIONS FOR SUGGESTED USE
Melting temperature: 960° C.
Bracket temperature: 70° C.
Bracket casting cooling: immediate in lukewarm water (about 40° C).
Annealing: 520° C for 20 minutes followed by rapid cooling in hot water (min. 40 ° C).
Flow temperature: 650° C.
IMPORTANT: the brackets to be used must be vertical and closed on both sides. Open ingot molds cannot be used because the plates thus obtained break upon rolling.
PVC hose for compressed Air mm 10 x 15
Material: PVC, transparent reinforced with high resistance polyester insert.
Internal diameter: 10 mm. Outside diameter: 15 mm.
To purchase please select desired quantity of meters.
Pickling tank- 10,5 Liters
Equipped with a stainless steel basket.
Adjustable Heating temperature (0 - 80°C).
Tank Size: mm 300 x 240 x 170H.
ECON N. 4 Burner
Silver wire solder Medium 40%
Thickness: 1,0 mm.
Composition: 40% Silver - 30% Copper - 28% Zinc.
Melting range: 640° - 700°C.
To purchase please select desired package.
Ceramic replacement for Ring Stand
To be mounted on base with clamp.
Silver wire solder Hard 20%.
Thickness: 0,7 mm.
Composition: 20% Silver - 45% Copper - 35% Zinc.
Melting range: 690° - 795°C.
To purchase please select desired package.
Professional handle with copper bit, burner Ø mm 22
For propane liquid gas.
With hose connection, hose Ø mm 9.
Length 300 mm.
Made in Italy.
Welding wire for titanium 0.30 mm
Diameter: 0,30 mm.
Lenght: 1000 mm.
Lampert Item number: 304 310.
RAUCLAIR-E food grade transparent industrial tube
Material: RAU-PVC 8069, transparent.
Internal diameter: 4 mm. Outside diameter: 6 mm.
To purchase please select desired quantity of meters.
Melting Air Torch
Thanks to instantaneous high temperature reached (2600° C with Methane and 3100° C with Propane) it is possible to make welding operations before the heat spreads all over the workpiece.
Supplied with 4 interchangeable copper tips.
Available for Propane Gas or Methane.
Lenght: cm 43. Weight: 710 g.
To purchase please select desired gas.
FBAs for Acetylene and Propane regulators 3/8 left – 7000 l/h – max flow rate 10 mc/h
All the FBAs are made in compliance with ISO 5175 EN 730 CL1.
The functions performed are: they stop backfires – they stop gas back-flows – they let off overpressures.
Silver Sheet Solder - Medium