Graphite Ring Stand-Complete
Graphite Ring Stand-Complete
Mounted on base with swivel to provide the exact position or angle desired.
Clamp releases rod for replacement.
Tools for Soldering and Welding
Graphite Ring Stand-Complete
Mounted on base with swivel to provide the exact position or angle desired.
Clamp releases rod for replacement.
Bunsen Burner with thermocouple valve
The thermocouple valve interrupts the gas flow 10/15 seconds after the flame goes out.
Hose holder designed for hoses from 7 to 13 mm.
For use with natural gas.
Made in Italy.
KCal / h: 4200
Flame temperature: 1300 °C
PUK Flow Regulator
Vermiculite Soldering Block
Soldering Tweezers 170 mm
Stainless steel pickling tank- 3,5 Liters
Equipped with a stainless steel basket.
Heating temperature: 70°C.
Tank Size: mm 240 x 137 x 110H.
Hydrogen Torch System, 4 torches - 1800 W
Power: 1800 Watt
Torches number: 4 torches.
The system produces energy by using electricity to electrolyze hydrogen and oxygen atoms from an electrolyte solution to create a safer, cleaner, more economical hydrogen/oxygen fuel.
Soldering Tweezers 200 mm
Air-Gas welding Torch with two control knobs
Pre-mixture flame and inner cone flame. Air pressure: 1,5 bar.
Lenght: cm 23. Grades: 1600° C. Weight: 233 g. Inner cone Ø 3 mm.
Made in Italy.
Welding wires for silver alloys Ag 970/000 0,35 mm
Diameter: 0,35 mm.
Lenght: 1000 mm.
Lampert Item number: 304 344.
Soldering alloy for yellow gold 18 Kt.
Carat: 18 kt.
Color: Yellow.
INDICATIONS FOR SUGGESTED USE
Melting temperature: 960° C.
Bracket temperature: 70° C.
Bracket casting cooling: immediate in lukewarm water (about 40° C).
Annealing: 520° C for 20 minutes followed by rapid cooling in hot water (min. 40 ° C).
Flow temperature: 650° C.
IMPORTANT: the brackets to be used must be vertical and closed on both sides. Open ingot molds cannot be used because the plates thus obtained break upon rolling.
Soldering Tweezers 165 mm
KCal / h: 680
Flame temperature: 1100 °C
Silver wire solder Hard 20%
Thickness: 1,0 mm.
Composition: 20% Silver - 45% Copper - 35% Zinc.
Melting range: 690° - 795°C.
To purchase please select desired package.
ECON N. 0 Burner
Cool Paste for soldering
Protects components under direct flame.
Not necessary to remove stone before soldering.
Bottle 120 Ml.
Ceramic Red Brick
Gas / oxygen Torch with interchangeable tips
This kit includes: handle, torch, 6 tips, 5 needles and adapter.
Includes 6 brass tips Gas / oxygen: 25 liters/hour - 50 liters/hour - 75 liters/hour - 100 liters/hour - 150 liters/hour - 225 liters/hour.
Includes one brass adapter and 5 needles, diameters: 0,6 mm - 0,7 mm - 0,8 mm - 1,20 mm.
Max capacity: 1500 liters / hour.
Made in italy.
Soldering Tweezers 180 mm
Burner Ø 40 mm for Air-Gas welding Torch
Gas consumption: 1350 Lt / h.
Air consumption: 11000 Lt / h.
Made in Italy.
ECON N. 4 Burner
Bronze wire solder
Thickness: 2,0 mm.
Composition: 5% Silver - 89% Copper - 6% Phosphorus.
Wire Length: 50 cm.
Melting range: 650° - 810°C.
Wire weight: about 12 grams.
Cadmium-free.
Made in Italy.
To purchase please select desired package.
Melting Air Torch
Thanks to instantaneous high temperature reached (2600° C with Methane and 3100° C with Propane) it is possible to make welding operations before the heat spreads all over the workpiece.
Supplied with 4 interchangeable copper tips.
Available for Propane Gas or Methane.
Lenght: cm 43. Weight: 710 g.
To purchase please select desired gas.
Third Hand
Silver wire solder Medium 40%
Thickness: 1,0 mm.
Composition: 40% Silver - 30% Copper - 28% Zinc.
Melting range: 640° - 700°C.
To purchase please select desired package.
Propane GPL Regulator with manometer
For continuous and heavy use. Last long and very strong. No maintenance required.
Connection thread: 20x14/1”FSx.
Entirely made of pressed brass OT58 in compliance with UNI EN ISO 2503.
Suitable for compressed gases up to 200 bar – supplied with exhaust valve and pressure gauges in compliance with UNI EN ISO 5171.
Made in Italy.
PVC hose for compressed Air mm 10 x 15
Material: PVC, transparent reinforced with high resistance polyester insert.
Internal diameter: 10 mm. Outside diameter: 15 mm.
To purchase please select desired quantity of meters.
Flux Brush
Granular pickling agent - kg. 1
Professional handle with copper bit, burner Ø mm 22
For propane liquid gas.
With hose connection, hose Ø mm 9.
Length 300 mm.
Made in Italy.
Injector for Blown Air Torch
Tungsten Carbide Soldering Pick
With wooden handle.
Aluminum wire solder
Thickness: 2,0 mm.
Composition: 12% Silicon - 88% Aluminum.
Melting range:577° - 582° C.
Wire Length: 50 cm.
Cadmium-free.
Use only with Brazing Flux for Aluminium soldering.
To purchase please select desired package.
CLA Handle lance shaped
Torch Holder For Bench
You can mount on your bench to accommodate most torches.
Screws included.