FBAs for Acetylene and Propane regulators
FBAs for Oxygen regulator 3/8 right - 7000 l/h
Max flow rate 40 mc/h.
All the FBAs are made in compliance with UNI EN ISO 730.
Made in Italy.
Tools for Soldering and Welding
FBAs for Oxygen regulator 3/8 right - 7000 l/h
Max flow rate 40 mc/h.
All the FBAs are made in compliance with UNI EN ISO 730.
Made in Italy.
Silver wire solder Extra-easy 56%
Thickness: 0,5 mm.
Composition: 56% Silver - 22% Copper - 17% Zinc.
Melting range: 620° - 650°C.
To purchase please select desired package.
Cool Paste for soldering
Protects components under direct flame.
Not necessary to remove stone before soldering.
Bottle 120 Ml.
“Parigi” Blown Air Torch
Available for Propane Gas or Methane.
Lenght: cm 20. Weight: 180 g.
Grades: 1400°C.
Made in Italy.
Soldering alloy for White gold 18 Kt
To purchase please select desired hardness.
Carat: 18 kt.
Color: White.
INDICATIONS FOR SUGGESTED USE
Melting temperature: 970° C.
Bracket temperature: 70° C.
Bracket casting cooling: immediate in lukewarm water (about 40° C).
Annealing: 520° C for 20 minutes followed by rapid cooling in hot water (min. 40 ° C).
Flow temperature: 670° C.
IMPORTANT: the brackets to be used must be vertical and closed on both sides. Open ingot molds cannot be used because the plates thus obtained break upon rolling.
KCal / h: 9800
Flame temperature: 1100 °C
Honeycomb Board
ECON N. 4 Burner
Marble Borax Slate
Add a small amount of water to obtain a paste as a flux for soldering.
Flux Brush
Soldering alloy for yellow gold 18 Kt.
Carat: 18 kt.
Color: Yellow.
INDICATIONS FOR SUGGESTED USE
Melting temperature: 960° C.
Bracket temperature: 70° C.
Bracket casting cooling: immediate in lukewarm water (about 40° C).
Annealing: 520° C for 20 minutes followed by rapid cooling in hot water (min. 40 ° C).
Flow temperature: 650° C.
IMPORTANT: the brackets to be used must be vertical and closed on both sides. Open ingot molds cannot be used because the plates thus obtained break upon rolling.
Burner Ø 40 mm for Air-Gas welding Torch
Gas consumption: 1350 Lt / h.
Air consumption: 11000 Lt / h.
Made in Italy.
KCal / h: 4200
Flame temperature: 1300 °C
Professional handle with copper bit, burner Ø mm 22
For propane liquid gas.
With hose connection, hose Ø mm 9.
Length 300 mm.
Made in Italy.
Welding wires for silver alloys Ag 970/000 0,35 mm
Diameter: 0,35 mm.
Lenght: 1000 mm.
Lampert Item number: 304 344.
Curved Cross-Lock Soldering Tweezers
Lenght 190 mm.
Heat-resistant fiber grips Handles.
Polished stainless steel.
Made in Italy.
Melting Air Torch
Thanks to instantaneous high temperature reached (2600° C with Methane and 3100° C with Propane) it is possible to make welding operations before the heat spreads all over the workpiece.
Supplied with 4 interchangeable copper tips.
Available for Propane Gas or Methane.
Lenght: cm 43. Weight: 710 g.
To purchase please select desired gas.
Professional handle for propane liquid gas
With saving lever and quick throttle.
With hose connection, hose Ø mm 7/11.
Compatible with lance Art. 13.3249AE.21.
Threaded connection extensions G-3/8" right.
Length 195 mm.
Made in Italy.
Silver wire solder Extra-easy 56%
Thickness: 1,0 mm.
Composition: 56% Silver - 22% Copper - 17% Zinc.
Melting range: 620° - 650°C.
To purchase please select desired package.
Fine Borax Cone
Prepared borax for making flux for soldering jewelry.
Dissolves easily when rubbed on borax slate.
Comes in 100 g. cone.
Third Hand
Air-Gas welding Torch with two control knobs
Pre-mixture flame and inner cone flame. Air pressure: 1,5 bar.
Lenght: cm 23. Grades: 1600° C. Weight: 233 g. Inner cone Ø 3 mm.
Made in Italy.
Ceramic Ring Stand-Complete
Mounted on base with swivel to provide the exact position or angle desired.
Clamp releases rod for replacement.
KCal / h: 680
Flame temperature: 1100 °C
Silver wire solder Hard 20%
Thickness: 1,0 mm.
Composition: 20% Silver - 45% Copper - 35% Zinc.
Melting range: 690° - 795°C.
To purchase please select desired package.
Soldering Tweezers 200 mm
Granular Borax Powder
Bottle of 1 kg.
Air-Gas welding Torch
Use with methane gas and compressed air.
To be used with interchangeable tips (see accessories).
With pilot flame, with two control knobs.
Length: 30 cm. Weight: 295 g.
Made in Italy.
Microflame Burner PROXXON MFB/E
Micro Torch GT-3000
Propane GPL Regulator with manometer
For continuous and heavy use. Last long and very strong. No maintenance required.
Connection thread: 20x14/1”FSx.
Entirely made of pressed brass OT58 in compliance with UNI EN ISO 2503.
Suitable for compressed gases up to 200 bar – supplied with exhaust valve and pressure gauges in compliance with UNI EN ISO 5171.
Made in Italy.
Propane gas Welding hose, internal diameter Ø 8 mm
External diameter Ø 15 mm.
Suitable for the conduction of propane in welding equipment.
Compliant with UNI EN 559 / DIN EN ISO 3821 ISO 1307 standards.
To purchase select desired length.
PUK Tungsten electrodes
Electrodes Eco-pack 10 pieces 0.6 mm WLa
10 pieces - contains no Thorium oxide (non radioactive).
Size: 0,6 x 50 mm.
Silver Powder solder 56%
Silver %: 56%. Cadmium-free.
Made in Italy.
To purchase please select desired package.
Silver Sheet Solder - Hard