Honeycomb Board 95 x 135 mm
Honeycomb Board
Tools for Soldering and Welding
Honeycomb Board
Silver Sheet Solder - Soft
Soldering alloy for White gold 18 Kt
To purchase please select desired hardness.
Carat: 18 kt.
Color: White.
INDICATIONS FOR SUGGESTED USE
Melting temperature: 970° C.
Bracket temperature: 70° C.
Bracket casting cooling: immediate in lukewarm water (about 40° C).
Annealing: 520° C for 20 minutes followed by rapid cooling in hot water (min. 40 ° C).
Flow temperature: 670° C.
IMPORTANT: the brackets to be used must be vertical and closed on both sides. Open ingot molds cannot be used because the plates thus obtained break upon rolling.
Flux Brush
KCal / h: 5700
Flame temperature: 1100 °C
Soldering Tweezers 165 mm
Bronze wire solder
Thickness: 2,0 mm.
Composition: 5% Silver - 89% Copper - 6% Phosphorus.
Wire Length: 50 cm.
Melting range: 650° - 810°C.
Wire weight: about 12 grams.
Cadmium-free.
Made in Italy.
To purchase please select desired package.
Curved Cross-Lock Soldering Tweezers 160 mm
Polished stainless steel. Heat-resistant fiber grips.
The cross-lock mechanism opens when pressed.
Made in Italy.
Professional handle for propane liquid gas
With saving lever and quick throttle.
With hose connection, hose Ø mm 7/11.
Compatible with lance Art. 13.3249AE.21.
Threaded connection extensions G-3/8" right.
Length 195 mm.
Made in Italy.
KCal / h: 9800
Flame temperature: 1100 °C
Soldering Tweezers 180 mm
Silver wire solder Extra-easy 56%
Thickness: 0,7 mm.
Composition: 56% Silver - 22% Copper - 17% Zinc.
Melting range: 620° - 650°C.
To purchase please select desired package.
Propane GPL Regulator with manometer
For continuous and heavy use. Last long and very strong. No maintenance required.
Connection thread: 20x14/1”FSx.
Entirely made of pressed brass OT58 in compliance with UNI EN ISO 2503.
Suitable for compressed gases up to 200 bar – supplied with exhaust valve and pressure gauges in compliance with UNI EN ISO 5171.
Made in Italy.
Pickling tank- 10,5 Liters
Equipped with a stainless steel basket.
Adjustable Heating temperature (0 - 80°C).
Tank Size: mm 300 x 240 x 170H.
PVC hose for compressed Air mm 10 x 15
Material: PVC, transparent reinforced with high resistance polyester insert.
Internal diameter: 10 mm. Outside diameter: 15 mm.
To purchase please select desired quantity of meters.
Air-Gas welding Torch
Natural gas / propane powered.
To be used with interchangeable tips (see accessories).
Model without pilot flame, with two control knobs.
Length: 33 cm. Weight: 405 g.
Made in Italy.
Ceramic Ring Stand-Complete
Mounted on base with swivel to provide the exact position or angle desired.
Clamp releases rod for replacement.
Fine Borax Cone
Prepared borax for making flux for soldering jewelry.
Dissolves easily when rubbed on borax slate.
Comes in 100 g. cone.
Brazing Flux for Aluminium soldering
Remove the oxidation layer and improve the melting of the brazing alloys.
Working range temperature: 515° - 630° C.
Bottle 250 g.
Marble Borax Slate
Add a small amount of water to obtain a paste as a flux for soldering.
Cool Paste for soldering
Protects components under direct flame.
Not necessary to remove stone before soldering.
Bottle 120 Ml.
ECON N. 00 Burner
Silver paste solder 56%
Silver %: 56%. Cadmium-free.
Melting range: 620° - 650°C.
Made in Italy.
To purchase please select desired package.Professional handle with copper bit, burner Ø mm 22
For propane liquid gas.
With hose connection, hose Ø mm 9.
Length 300 mm.
Made in Italy.
Torch Holder
Heavy base.
Made in Italy.
Bunsen Burner with thermocouple valve
The thermocouple valve interrupts the gas flow 10/15 seconds after the flame goes out.
Hose holder designed for hoses from 7 to 13 mm.
For use with natural gas.
Made in Italy.
Tripod
Micro Torch PT-4000
ECON N. 4 Burner
Rotating soldering table
With high-heat ceramic board.
Diameter: Ø 115 mm.
Honeycomb Board
Soldering alloy for yellow gold 18 Kt.
Carat: 18 kt.
Color: Yellow.
INDICATIONS FOR SUGGESTED USE
Melting temperature: 960° C.
Bracket temperature: 70° C.
Bracket casting cooling: immediate in lukewarm water (about 40° C).
Annealing: 520° C for 20 minutes followed by rapid cooling in hot water (min. 40 ° C).
Flow temperature: 650° C.
IMPORTANT: the brackets to be used must be vertical and closed on both sides. Open ingot molds cannot be used because the plates thus obtained break upon rolling.
Third Hand
Welding wires for silver alloys Ag 970/000 0,35 mm
Diameter: 0,35 mm.
Lenght: 1000 mm.
Lampert Item number: 304 344.
Ceramic Block
Microflame Burner PROXXON MFB/E