Tools for Soldering and Welding
Copper wire solder
Thickness: 1,5 mm.
Composition: 93% Copper - 7% Phosphorus.
Wire Length: 50 cm.
Melting range: 710° - 750°C.
Cadmium-free.
Made in Italy.
To purchase please select desired package.
Bronze wire solder
Thickness: 2,0 mm.
Composition: 5% Silver - 89% Copper - 6% Phosphorus.
Wire Length: 50 cm.
Melting range: 650° - 810°C.
Wire weight: about 12 grams.
Cadmium-free.
Made in Italy.
To purchase please select desired package.
Aluminum wire solder
Thickness: 2,0 mm.
Composition: 12% Silicon - 88% Aluminum.
Melting range:577° - 582° C.
Wire Length: 50 cm.
Cadmium-free.
Use only with Brazing Flux for Aluminium soldering.
To purchase please select desired package.
Bunsen Burner
Torch Holder For Bench
You can mount on your bench to accommodate most torches.
Screws included.
ORION mPulse 30 arc welder
Graphite Ring Stand-Complete
Mounted on base with swivel to provide the exact position or angle desired.
Clamp releases rod for replacement.
Tungsten Carbide Soldering Pick
With wooden handle.
FBAs for Oxygen regulator 3/8 right - 7000 l/h
Max flow rate 40 mc/h.
All the FBAs are made in compliance with UNI EN ISO 730.
Made in Italy.
Silver paste solder 56%
Silver %: 56%. Cadmium-free.
Melting range: 620° - 650°C.
Made in Italy.
To purchase please select desired package.Silver wire solder Extra-easy 56%
Thickness: 1,5 mm.
Composition: 56% Silver - 22% Copper - 17% Zinc.
Melting range: 620° - 650°C.
To purchase please select desired package.
Curved Cross-Lock Soldering Tweezers
Lenght 190 mm.
Heat-resistant fiber grips Handles.
Polished stainless steel.
Made in Italy.
Silver Powder solder 56%
Silver %: 56%. Cadmium-free.
Made in Italy.
To purchase please select desired package.
Torch Handle for oxyhydrogen welding machines
With open/close tap.
Made in Italy.
Flux for tin soldering
Flux for general solder works on all metalic surfaces except of aluminium and stainless steels.
Content: 500 ml.
Torch Handle for oxyhydrogen welding machines.
With open/close tap.
Methyl alcohol
Annealed iron wire
Annealed drawn iron wire in 10 kg reels.
Made in Italy.
Ceramic replacement for Ring Stand
To be mounted on base with clamp.
Bunsen Burner with thermocouple valve
The thermocouple valve interrupts the gas flow 10/15 seconds after the flame goes out.
Hose holder designed for hoses from 7 to 13 mm.
For use with natural gas.
Made in Italy.
Silver wire solder Extra-easy 56%
Thickness: 0,5 mm.
Composition: 56% Silver - 22% Copper - 17% Zinc.
Melting range: 620° - 650°C.
To purchase please select desired package.
Soldering alloy for White gold 18 Kt
To purchase please select desired hardness.
Carat: 18 kt.
Color: White.
INDICATIONS FOR SUGGESTED USE
Melting temperature: 970° C.
Bracket temperature: 70° C.
Bracket casting cooling: immediate in lukewarm water (about 40° C).
Annealing: 520° C for 20 minutes followed by rapid cooling in hot water (min. 40 ° C).
Flow temperature: 670° C.
IMPORTANT: the brackets to be used must be vertical and closed on both sides. Open ingot molds cannot be used because the plates thus obtained break upon rolling.
Soldering alloy for yellow gold 18 Kt.
Carat: 18 kt.
Color: Yellow.
INDICATIONS FOR SUGGESTED USE
Melting temperature: 960° C.
Bracket temperature: 70° C.
Bracket casting cooling: immediate in lukewarm water (about 40° C).
Annealing: 520° C for 20 minutes followed by rapid cooling in hot water (min. 40 ° C).
Flow temperature: 650° C.
IMPORTANT: the brackets to be used must be vertical and closed on both sides. Open ingot molds cannot be used because the plates thus obtained break upon rolling.
Brazing Paste Flux for soldering
For use with most of Silver alloys.
Working range temperature: 550° - 850° C.
Made in Italy.
Melting Air Torch
Thanks to instantaneous high temperature reached (2600° C with Methane and 3100° C with Propane) it is possible to make welding operations before the heat spreads all over the workpiece.
Supplied with 4 interchangeable copper tips.
Available for Propane Gas or Methane.
Lenght: cm 43. Weight: 710 g.
To purchase please select desired gas.
Burner Ø 40 mm for Air-Gas welding Torch
Gas consumption: 1350 Lt / h.
Air consumption: 11000 Lt / h.
Made in Italy.
Injector for Blown Air Torch
Hydrogen Torch System, 4 torches - 1800 W
Power: 1800 Watt
Torches number: 4 torches.
The system produces energy by using electricity to electrolyze hydrogen and oxygen atoms from an electrolyte solution to create a safer, cleaner, more economical hydrogen/oxygen fuel.
RAUCLAIR-E food grade transparent industrial tube
Material: RAU-PVC 8069, transparent.
Internal diameter: 4 mm. Outside diameter: 6 mm.
To purchase please select desired quantity of meters.
Propane gas Welding hose, internal diameter Ø 8 mm
External diameter Ø 15 mm.
Suitable for the conduction of propane in welding equipment.
Compliant with UNI EN 559 / DIN EN ISO 3821 ISO 1307 standards.
To purchase select desired length.
Oxygen and Acetylene Welding hose
Internal diameter Ø 6 mm.
External diameter Ø 13 mm.
Suitable for the conduction of oxygen and acetylene in welding equipment.
Compliant with UNI EN 559 / DIN EN ISO 3821 ISO 1307 standards.
To purchase select desired length.
Air-Gas welding Torch
Use with methane gas and compressed air.
To be used with interchangeable tips (see accessories).
With pilot flame, with two control knobs.
Length: 37 cm. Weight: 480 g.
Made in Italy.
Air-Gas welding Torch
Natural gas / propane powered.
To be used with interchangeable tips (see accessories).
Model without pilot flame, with two control knobs.
Length: 33 cm. Weight: 405 g.
Made in Italy.
Professional handle with copper bit, burner Ø mm 22
For propane liquid gas.
With hose connection, hose Ø mm 9.
Length 300 mm.
Made in Italy.
Lance complete with burner Ø 21 mm
For heavy brazings.
For handles, Art. 13.3249AC.
Connection with female thread, G-3/8".
Length 160 mm.
Made in Italy.
Professional handle for propane liquid gas
With saving lever and quick throttle.
With hose connection, hose Ø mm 7/11.
Compatible with lance Art. 13.3249AE.21.
Threaded connection extensions G-3/8" right.
Length 195 mm.
Made in Italy.
